This page has been translated for your convenience using a machine translation service. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. As a result, this translation may contain errors and inaccuracies. Autodesk provides no warranties, either express or implied, about the accuracy, reliability, or completeness of the machine translation and disclaims all liability for any losses or damages caused by, or resulting from your reliance on, this translation. The English version of this website is the official version.

NTI Group



NTI's extensive experience along with some of the best experts makes us a strong partner across a large part of Europe within the areas of mechanical design, architecture, construction, engineering and facility management. We also offer sustainability services. Training/courses/capacity development programs NTI has a number of Authorized Training Centers where you can attend courses in both local or English language.  We offer a wide range of training courses covering e.g. the Autodesk software portfolio and own developed software solutions; classroom training, e-training, instructor-led online training and personal coaching, and Autodesk certifications. Background Our team of more than 500 highly skilled employees in Denmark, Germany, Iceland, Italy, Norway, Spain, Sweden and The Netherlands form one of the leading suppliers for the mechanical design, architecture, construction and engineering industry. We are a full-service provider- delivering knowledge, education and consulting along with the software and hardware.  Our large team of certified experts are ready to provide you with technical support and expertise in your local language. We are ready to assist you both remotely and on-site.  NTI is a Autodesk Platinum Partner and a member of the Autodesk Development Network.

Autodesk Affiliations

Locations Served


Autodesk Specialized Partners are distinguished by their dynamic capacity, capabilities, proven customer success, and service delivery excellence. Specializations differentiate Autodesk partners based on their proven ability to deliver on desired customer outcomes through three tiers of achievement: Associate, Expert, and Master.

Partners that have achieved a Master Specialization badge have met the highest Autodesk standards of proven customer success and service delivery expertise within a given specialized Autodesk product group.

Architecture, Engineering & Construction


Product Design & Manufacturing


Media & Entertainment



These Autodesk Solutions have been identified by the Partner as solutions that they have expertise with and can support through their services organization.

Architecture, Engineering & Construction

Advance Steel
BIM 360
BIM 360 Build
BIM 360 Cost
BIM 360 Plan
BIM 360 Team
BIM Collaborate
Civil 3D
Dynamo Studio
Formit Pro
Point Layout
ReCap Pro
Robot Structual Analysis Professional
Structural Bridge Design
Vehicle Tracking

Product Design & Manufacturing

Autodesk CAMplete TruePath
Autodesk HSM
Autodesk Nastran In-CAD
Autodesk Within Medical
Configurator 360
Fusion 360
Fusion 360 - Machining Extension
Fusion 360 for Manufacturing
Fusion 360 Manage
Fusion 360 with FeatureCAM
Fusion 360 with Netfabb
Fusion 360 with PowerInspect
Fusion 360 with PowerMill
Fusion 360 with PowerShape
Netfabb Local Simulation
Post Processor
Vault PLM

Media & Entertainment

3ds Max
Character Generator
Media & Entertainment Collection


Accreditation helps educate, measure, and recognize our partners and their consultants for investing in customer success practices and services delivery. Accreditation is earned by completing a knowledge check on the topic, delivering the service to a customer, and having a positive review on the service delivery.

Optimize Accelerators

Architecture, Engineering & Construction

  • 3D Coordination Foundation (Civil Infrastructure)
  • BIM 360 Build Starter Pack
  • BIM 360 Design Starter Pack
  • BIM 360 Docs Starter Pack
  • Civil 3D Starter Pack
  • Civil Connection Foundation
  • Document Management Foundation (Construction)
  • InfraWorks Starter Pack
  • Quality & Safety Management Foundation (Construction)
  • Revit (Architecture) Starter Pack
  • Revit (Structure) Starter Pack
  • Revit Project Health Check
  • Revit Starter Pack (General)
  • Revit Starter Pack (MEP)

Product Design & Manufacturing

  • FeatureCAM Starter Pack
  • Forge Starter Pack (MFG)
  • Fusion 360: CAM Starter Pack
  • Generative Design Starter Pack (MFG)
  • Inventor Health Check
  • Inventor iLogic Starter Pack
  • Netfabb Starter Pack
  • PLM Implementor Process Foundation
  • PowerMill Starter Pack
  • PowerShape Starter Pack
  • Vault Starter Pack


  • Consulting Implementation Framework Workshop Overview
  • Coordinated Discovery Workshop Overview
  • Project Management Workshop Overview
  • Technical Product Support Accreditation

Success Stories

Explore documented success stories and testimonials featuring the value of Autodesk technology and Partner services delivered to solve for critical business requirements and desired customer outcomes.

Von der grünen Wiese zum Industriegebiet: Geländemodellierung mit Autodesk Civil 3D
Das Architektur- und Ingenieurbüro HOFFMANN.SEIFERT.PARTNER (HSP) plant im Auftrag der Stadt Schmalkalden die Erschließung eines über 35 Hektar großen Areals, auf dem ein neues Industrie- und Gewerbegebiet entstehen soll. Eine besondere Herausforderung liegt in der anspruchsvollen Topografie, die große Erdbewegung erfordert: Die Planer rechnen mit einem Volumen von rund 350.000 m³ Auf- und Abtrag beim Anlegen der Terrassenstruktur. Da zudem eine Anbindung an das bestehende Verkehrsnetz geplant ist, entschied sich HSP mit Autodesk Civil 3D für eine Lösung, die Verkehrs- wie auch Geländemodellierung abbildet.
T.S.T. Srl | 38 years of Custom-Made Thermoplastic Items
The company T.S.T. S.r.l., established in 1982, was born as a screen printing and thermo-printing business and then specialized in injection molding a few years later, the current core business of the company. Parallel to the molding of thermoplastic technopolymers with mono and bi-injection technologies, the company is equipped with a Tooling Department able to assist the customer in the co-design, design and construction of molds and related equipment necessary for processing and testing. Engineering and technical know-how are the strength to complete a "customer focused" service.
Plastic & Mold Engineering Srl is a consulting company that was founded in 2002 thanks to the experience gained in over 25 years on the design and construction of injection molds and the production of polymer products. The company provides engineering services for the development of plastic components through in-depth structural analysis and molding simulations involving various phases of the injection molding cycle, in order to verify and optimize the behavior of the numerous variables that affect the cost and in the final quality of a printed product. Plastic & Mold Engineering Srl operates and provides its services in various sectors of the manufacturing industry, from the automotive, household appliances, furniture and packaging sectors and collaborates with major research institutes and universities. The company proposes itself as a 360° partner in supporting the development of products made of polymeric material.
SEM Designs Better Products and Increases Speed to Market with Autodesk Moldflow
With over a century of experience as a subcontractor to the ever-changing automotive industry, SEM knows exactly what it takes to maintain its position. Some of the challenges of today’s business environment are the need for everything to go faster, the demands on quality are increasing, at the same time as customers expect suppliers to take increasing responsibility.
FD GROUP Srl | Passion and High Competence for Industrial Design
FD Group Srl is a leader in automotive support and industrial machine design and collaborates with the most renowned car manufacturers and companies in the engineering sector, both in Italy and abroad. The Company was created to support the innovation and competitiveness of companies in the development of products and technologies, from the creative phase to the industrialization phase. The main challenge of FD Group Srl is to provide its customers with constantly updated and prepared resources, equipped with all the tools, intellectual and practical, that allow them to guarantee a constantly top quality work. Every element of the company contributes to making this happen, through the training and use of innovative software. The ambition is to maintain a prestige that corresponds to that of the companies with which it collaborates.
Stora Enso Develop Sustainable Biocomposites with Autodesk Moldflow
Stora Enso realized early on the need to create sustainable businesses and therefore began early to think innovatively and develop new and more sustainable materials such as biocomposites as replacements for traditional plastics. One of the challenges was to keep down the customer's time and cost of changing materials. Many customers lacked the knowledge and the ability to perform simulations and to develop physical prototypes often became too expensive. Thus, they chose to continue with current materials, despite the fact that there were great environmental benefits from changing. Stora Enso, Circular Solutions therefore realized the need to take forward material data on biocomposites in order to be able to perform good simulations and convince the market to dare to use alternative materials.
How Fusion 360 and the Machining Extension Improved Lead Time and Productivity at Hein & Sønner A/S
Hein & Sønner, founded in 1878, are specialists in turning and milling operations in complex middle size parts delivering high accuracy quality products to the wind power and offshore industry. To drive business growth Hein & Sønner A/S are constantly focusing on developing the company through new investments in digital solutions to reduce manual CNC programming time, improve production capacity and lead time to meet customers’ needs.
Meneta Advanced Shims Technology Optimizes Product Definition and Documentation Process
Meneta is one of the world's leading manufacturers of anti-noise shims and back plates with production plants and testing facilities worldwide. Meneta has specialized in development, test, and production for the automotive industry. Quality is a key issue which is why they constantly focus on design, choice of materials, and methods of production. To maintain and improve overview on products, delivery, and traceability, they decided to go from manual connected processes in spreadsheets to a digitally connected solution to streamline their preparation processes.
Corona Animation für das Bundesministerium für Gesundheit
Die CAT MEDIC / CAT PRODUCTION GmbH hat sich auf Medizin Animation und Visualisierung mit den Media- und Entertainment-Lösungen von Autodesk spezialisiert. Das Deutsche Bundesministerium für Gesundheit entwickelte ein Nationales Gesundheitsportal, bei dem sich jedermann und -frau für Nichtmediziner aufbereitete zuverlässige Informationen zu Gesundheit und Pflege jenseits von Google einholen kann. Dafür wurde das Team der CAT PRODUCTION GmbH beauftragt.
voestalpine Precision Strip (vPS) Optimizes Factory and Machine Documentation Process
vPS is a manufacturer of cold-rolled strip steel, meeting the highest quality standards available. With production and distribution companies in Austria, Sweden and the United States as well as sales subsidiaries in the United States, China, Spain and Mexico. vPS primarily supplies raw materials that customers then refine. There are approximately 2,500 active products produced in 120 production machines. voestalpine Precision Strip employs 1200 people and exports products for over 270 Mio € to over 80 countries. To maintain and improve both product delivery and production flexibility, management recognized a need to streamline their processes, focusing on three main areas: 1) Short lead time from request to delivery 2) Flexibility in production 3) Maintaining high product quality The primary challenges were highly complex and needed a new approach to be able to deliver on the three focus areas.
Vrolijk Collaborates with Clients and Construction Partners in the Cloud on Amsterdam Logistic City Hub
At Construction Company Vrolijk, the well-being, safety and health of employees and their environment in and around construction are central. In doing so, the Company takes into account the impact on the environment. They do this by drawing up an individual quality, safety and environmental plan for each project. Meeting this important corporate mission and continuing to facilitate future growth in a flexible manner became a significant challenge for the Company.
Oluf Jørgensen A/S (OJAS) Improves their Digital Workflows, Communication and Collaboration Processes after Implementing Autodesk Construction Cloud
Oluf Jørgensen A/S (OJAS) is a nationwide consulting engineering company with branches in 6 cities in Denmark: Aarhus, Horsens, Odense, Roskilde, Copenhagen and Sønderborg. The desire to work digitally, and thereby utilize the resources in the best possible way, is very high. When core competencies from different departments work together on large projects, it places high demands on a digital platform that can help gather communication and support the digital work process across geographical distances.
Aalsrode Machine Factory Develops a Giant Funnel with Advanced Autodesk 3D Software
Ålsrode Smede & Maskinfabrik is a machine factory in Denmark, focusing on satisfying even the most demanding customers as a subcontractor in high-quality products. One of their customers, the Port of Grenaa, wanted a giant funnel to quickly enable them to empty bulk goods such as grain, rice, corn, nuts and wood pellets from ship to trucks in a fast way - and without any waste. As the Port of Grenaa is called at by ever larger ships, customers’ demands for the handling of the goods has grown significantly.
Danish Tool Factory's Migration to Autodesk PowerMill & Fusion Platform Improves Cost Efficiency (and provides new options)
Hjernø Værktøjsfabrik A/S is one of Northern Europe's largest and oldest tool manufacturers and highly specialized in producing technically demanding injection molding tools. Hjernø A/S was facing challenges as their former solution was not providing high enough performance and did e.g. not perform in 5-axis simultaneous mode. They wanted a more efficient solution that would rely less on manual labor and utilize automation to a higher degree.
Geländeplanung und Mengenermittlung leicht gemacht mit CADsys und Autodesk Civil 3D
Biogas ist längst eine der wichtigsten regenerativen Energiequellen, mit deren Hilfe fossile Brennstoffe eingespart werden. Etwa 9.500 Anlagen produzieren allein in Deutschland umweltschonend Strom, Wärme und Treibstoff. Problematisch werden sie nur dann, wenn im Falle einer Havarie Gärflüssigkeit austritt, die die Gewässer verunreinigt. Eine Verordnung von 2017 fordert daher, dass Biogasanlagen bis August 2022 – sofern möglich – umwallt werden müssen. Dies ist eine Herausforderung für die Betreiber der Anlagen, die ihr Gelände dafür umformen müssen. Die Ingenieure Bau-Anlagen-Umwelttechnik SHN GmbH (IB SHN) aus Chemnitz, betreut mehrere hundert Biogasanlagen in Deutschland. Mit ihrer Expertise unterstützen sie die Betreiber bei der Umsetzung der gesetzlichen Vorgaben. Die Umsetzung birgt allerdings einige Tücken. Da die Umwallungen bis August 2022 umgesetzt sein müssen, stehen die Verantwortlichen unter großem Zeitdruck. Hinzu kommt, dass die Berechnung sehr komplex ist.
Officine Gaudino Spa was founded in the mid-1920s in Cossato, thanks to Pietro Gaudino. Immediately, the company was involved in the construction of small textile machines, then moving on to the construction of larger machinery such as fullers, wolf cards, washes, twisters etc. Around the mid-1950s Dante Gaudino, the owner's son, began specializing in the production of spinning machines, abandoning the other machines. The first spinning machines were for regenerated cotton (very widespread at the time), then followed those for wool and other fine fibers to finish with those for aramidic celluloid chemical fibers, etc. always in the wool sector. Today the Officine Gaudino are led by Piero, Roberto and Paola Gaudino, sons of Dante. The Officine Gaudino brands are present all over the world with a widespread sales network, which guarantees an adequate service to customers in sales, assistance and spare parts.
GRANSTUDIO | A higher level of innovation in car design
Granstudio was formed in 2011 in Turin by Lowie Vermeersch and a group of partners experienced in Car design, in the past this team has been able to create and manage some of the most renowned automotive projects in recent history. The main challenge for the new studio was to combine passion and competence with the vision of future mobility, in order to expand its experience to new possibilities in the field of innovative car design. Today this unique combination of vision and expertise allows Granstudio to design future means of mobility (cars, vehicles, services and policies) that are successful because they are embedded in their future context. Granstudio is comprised of a multidisciplinary team of 70 people working on a global range of projects ranging from initial research and strategy to production design. In parallel, independent research projects are also being developed, in collaboration with the well-known Dutch laboratory of ideas, Reframing Studio.
Panebarco Srl is a company founded in 1995, which in the last 12 years has specialized in the production of videos in animated graphics, cartoons and 3D animations. The project is a Christmas commercial made with Autodesk 3ds Max for the client Nuovarredo, and created in collaboration with the communication agency Stailfab who took care of the concept, storyboard and direction.
Breman Schoorsteentechniek Improves Effectivity with Autodesk Inventor, Revit and Vault
Breman Schoorsteentechniek develops and produces prefab chimneys, flue gas discharge systems and ventilation solutions for heat pumps. As a manufacturing company for the construction industry, they supply solutions mainly to contractors and installation companies throughout the Netherlands. For a long time these have been designed and further developed internally with AutoCAD and StabiCAD. They wanted to implement a more effective solution with the increasing use of BIM in construction projects and the mandatory sustainability of homes and buildings.
TOL Plaatwerk Automates with Autodesk Inventor and Vault supported by NTI CAD & Company
Tol Plaatwerk has been delivering customized solutions in the field of sheet metal processing for over 70 years now. A large part of the production is intended for height-adjustable desks and furniture for control rooms. Furthermore, the company makes sheet metal products for the housings of machines, displays, cabinets, fencing, platforms and interior/residential construction. They wanted to automate engineering and work preparation so they could save time and diminish the chance of making mistakes.
Realization new Cable Car “Son dei Prade – Bai De Dones” – as part of the Cortina 2021 Ski World Championships
The project has two companies as protagonists: 2D to 6D by Neri Lorenzetto Bologna - which owns the goal of implementing BIM in all sectors – and Leitner SPA - a worldwide leading company in the design and construction of cableways. The project was developed to ensure the cableway connection between the ski areas of "Cortina d'Ampezzo" and "5 Torri". It involves the construction of two cable cars and automatic coupling connected to each other with an intermediate passage station.
OPACMARE | Sailing to Innovation
OPACMARE has been operating in the yacht and superyacht components market since 1995. From the Rivalta headquarters in Turin - home to the main production plant - product and commercial development grew exponentially and allowed the company to build a global business in a few years. OPACMARE is today the world leader in the accessories sector and collaborates with the main boatyards in the world.
SIMES is a consolidated company dedicated to the design and production of superior outdoor lighting fittings. "Light for all around the building" is their mission: create emotions with the best architectural lighting solutions and visual comfort. More than producing lighting fittings, SIMES produces emotions for architecture, landscape, private contexts and urban spaces. SIMES creates libraries in Revit complete with all photometric data to help the implementation phase with maximum realism.
ITALIANPACK | Technology and Innovation for Food Packaging
ITALIANPACK SRL was founded in 1988 and is a leader in the production of packaging machines. Specialized in tray sealers, thermoforming machines, and also in vacuum packers in bags and in a protective atmosphere. Italianpack helps its customers to package food products with the main objective of keeping the product as fresh as possible and with a marketing oriented packaging.
Tectonica - From Paper Magazine to Interactive 3D Model Platform
Tectónica is a well-known Spanish architecture and construction magazine published by the company ATC Ediciones, focused on offering construction solutions characteristically drawn in axonometric and colour systems, also known for listing data of of materials and construction systems. After 18 years from birth, its paper format was ended and was to be replaced by a complete online platform. The challenge was to provide the subscribers of the on-line magazine with interactive 3D BIM models.
GEORGIAN WINE CLUB | A total BIM project for BUILT Retail Management System
BUILT is an Italian Project and Construction Management Company that joins the engineering method with a smart approach to design and manage physical assets. Their mission is to “make it happen” and to: 1) Focus on and reach client objectives by defining and implementing a tailored process 2) Ensure an efficient design using BIM software and information sharing 3) Guarantee the total control of the construction process with their streamlined contractors and site management.
A Story of Innovation and High Technology with GAI MACCHINE IMBOTTIGLIATRICI SPA
GAI MACCHINE IMBOTTIGLIATRICI SPA was founded in 1946 and has been involved since then in the design and production of Filling Machines. Their mission is to offer their customers high quality and high technology machinery, and ensuring their efficiency during the entire product lifecycle. Their challenge was the digitalization of their company from design to after sales management.



Large (100 or more employees)




  • Danish
  • Dutch
  • English
  • German
  • Italian
  • Norwegian
  • Spanish
  • Swedish
  • Specialization

    Building Architecture

    Building Architecture specialized partners are focused on Autodesk solutions and services to optimize building design through improved team collaboration, improved data handover, reduced overall design time and increased workoad capacity.

    Civil Infrastructure

    Civil Infrastructure specialized partners help customers optimize Autodesk solutions for delivering successful advanced design projects that include roads, highways, bridges, railways, and/or water infrastructure requirements.

    Mechanical, Electrical & Plumbing (MEP)

    Mechanical, Electrical & Plumbing (MEP) specialized partners help customers optimize Autodesk BIM solutions to improve productivity, design and fabricate better building systems, create model-based project estimates, and efficiently add MEP components to designs.

    Plant Design

    Plant Design specialized partners help customers optimize Autodesk solutions to design, build and operate high performing industrial and manufacturing plants.

    Structural Engineering & Fabrication

    Structural Engineering & Fabrication specialized partners help customers optimize Autodesk solutions for effective design, detailing, and creation of parts, assemblies, building systems, or structures from steel, concrete, and other materials.

    Pre-Construction Design & Planning

    Pre-Construction Design & Planning specialized partners help customers optimize Autodesk Construction Cloud solutions to deliver BIM design authoring and collaboration, project planning and coordination, BIM data management, quantification and bid management.

    Site Construction & Operations

    Site Construction & Operations specialized partners help customers optimize Autodesk Construction Cloud solutions to deliver project management, cost management, field collaboration, quality and safety management, project closeout and facilities management.

    Advanced Materials Analysis

    Advanced Materials Analysis specialized partners help customers optimize Autodesk solutions to deliver advanced simulation, injection molding and progressive failure analysis.

    Computer Aided Manufacturing (CAM)

    Computer Aided Manufacturing (CAM) specialized partners help customers optimize Autodesk digital manufacturing solutions to deliver additive manufacturing, subtractive manufacturing, and generative design.

    Industrial Design & Visualization

    Industrial Design & Visualization specialized partners help customers optimize Autodesk solutions to create, analyze, visualize, and communicate design intent and aesthetics before building a physical prototype including 3D virtual prototyping for automotive design.

    Product Design & Manufacturing

    Product Design & Manufacturing specialized partners help customers optimize Autodesk solutions to deliver product performance, operational efficiency, innovation capacity and simulation fundamentals including mechanical and fluid simulation, stress analysis and finite element analysis (FEA).

    Product Lifecycle Management (PLM)

    Product Lifecycle Management (PLM) specialized partners help customers optimize Autodesk solutions to manage complex product information, engineering and manufacturing workflows, and enterprise-wide collaboration for all involved in the product lifecycle - from engineering and supply chain to quality and manufacturing.

    Advanced Design

    Advanced Design specialized partners help customers utilize the Autodesk Fusion platform for simulation and generative design solutions to design and engineer products with optimized aesthetics, form, fit, and function.

    Advanced Machining

    Advanced Machining specialized partners help customers utilize the Autodesk Fusion platform for enabling additional high-end machining capabilities including advanced 3- and 5-axis strategies, toolpath optimization, and process automation.

    Additive Manufacturing

    Additive Manufacturing specialized partners help customers utilize the Autodesk Fusion platform for enabling machinery to produce lighter, stronger, and better performing parts whilst also reducing material wastage and cost.

    Advanced Mill Simulation

    Advanced Mill Simulation specialized partners help customers optimize Autodesk solutions for post-processing, verification, and simulation using multi-axis milling machines.

    Media & Entertainment Industry

    Media & Entertainment Industry specialized partners help customers optimize Autodesk solutions to deliver 3D modeling, animation, visual effects, and rendering.

    Production Management

    Media & Entertainment Production Management specialized partners help customers optimize Autodesk solutions to streamline creative workflows, enable resources with superior project planning and scheduling capabilities, and keep teams connected and collaborating in the cloud anytime, anywhere.