Icon/Nav/Back ArrowBack to Results
E814E2A1-5EAC-461A-B524-37EECDEA46B7@1x

This page has been translated for your convenience using a machine translation service. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. As a result, this translation may contain errors and inaccuracies. Autodesk provides no warranties, either express or implied, about the accuracy, reliability, or completeness of the machine translation and disclaims all liability for any losses or damages caused by, or resulting from your reliance on, this translation. The English version of this website is the official version.

CADD Microsystems

Contact

Overview

From BIM to FM and everything in between, CADD Microsystems can assist with structuring your mission-critical technology and processes to increase collaboration, improve quality, reduce cost and benefit your bottom line. We are an Autodesk Platinum Partner, Government Specialized, and build solutions to address our clients' individual needs with solutions spanning Autodesk and FM software, custom software development, BIM process consulting, professional services and employee training.  Plus, we've earned best-in-class client satisfaction scores - the highest of any Platinum Partner. We have more than 30 years of experience as a consulting and software firm specializing in all phases of the building lifecycle, for both government and commercial organizations. We understand the unique challenges of deploying and adopting Autodesk technology in the public sector, and develop tailored BIM requirements, LOD, BIM Execution Plans and Revit content to form the backbone of your design and construction practice, to ensure consistency across all projects. Whatever your organization goals are, we can help you achieve them.

Autodesk Affiliations

Locations Served

    • United States
  • Online / Virtual
  • Will travel to client's location

Specializations

Autodesk Specialized Partners are distinguished by their dynamic capacity, capabilities, proven customer success, and service delivery excellence. Specializations differentiate Autodesk partners based on their proven ability to deliver on desired customer outcomes through three tiers of achievement: Associate, Expert, and Master.

Partners that have achieved a Master Specialization badge have met the highest Autodesk standards of proven customer success and service delivery expertise within a given specialized Autodesk product group.

Architecture, Engineering & Construction

E814E2A1-5EAC-461A-B524-37EECDEA46B7@1x
E814E2A1-5EAC-461A-B524-37EECDEA46B7@1x
E814E2A1-5EAC-461A-B524-37EECDEA46B7@1x

Solutions

These Autodesk Solutions have been identified by the Partner as solutions that they have expertise with and can support through their services organization.

Architecture, Engineering & Construction

Advance Steel
Assemble
AutoCAD
BIM 360
BIM 360 Build
BIM 360 Cost
BIM 360 Plan
BIM 360 Team
BIM Collaborate
Build
Civil 3D
Docs
Dynamo Studio
Formit Pro
InfraWorks
Navisworks
PlanGrid
Point Layout
ReCap Pro
Revit
Vehicle Tracking

Product Design & Manufacturing

AutoCAD
Inventor

Media & Entertainment

3ds Max

Accreditations

Accreditation helps educate, measure, and recognize our partners and their consultants for investing in customer success practices and services delivery. Accreditation is earned by completing a knowledge check on the topic, delivering the service to a customer, and having a positive review on the service delivery.

Optimize Accelerators

Architecture, Engineering & Construction

  • BIM 360 Design Starter Pack
  • Revit (Architecture) Starter Pack

Skills

  • Consulting Implementation Framework Workshop Overview
  • Project Management Workshop Overview
  • Technical Product Support Accreditation

Success Stories

Explore documented success stories and testimonials featuring the value of Autodesk technology and Partner services delivered to solve for critical business requirements and desired customer outcomes.

Custom Revit Template to Improve Project Outcomes
GuernseyTingle is a full-service architecture, interior, and planning firm located in Williamsburg, VA. GuernseyTingle has been using Autodesk Revit for several years, primarily with internal support for Revit standards and content. As business increased for the firm, it created limitations on the amount of time dedicated to keeping their Revit standards up to date. The growth of the company also had other ramifications by limiting available bandwidth to do other model and software management tasks, such as resolving “random” issues in Revit projects and deploying software updates firm-wide.
Using Dynamo to Create a Long-term Solution
DuctSox manufactures custom-engineered commercial and industrial air dispersion products for open ceiling architecture, critical environments, and underfloor applications, and is headquartered in Dubuque, Iowa. DuctSox was using a custom piping program application built on top of AutoCAD to design their custom fabric ducting systems. In their workflow, they were drawing in 3D, then opening and flattening the drawing to export engineering data to a CSV file for production. The application exported data to validate the design while also meeting the requirements of the engineering team for air distribution. They were looking for a replacement for their current custom application, as it was being discontinued. Their current application was also missing a few critical features, including different shapes and size drawings that needed to be added to a new solution.
Custom On-Demand Training to Standardize User Knowledge of AutoCAD and Civil 3D
McAdams Company is a civil engineering firm located in Durham, NC. As part of their ongoing efforts to provide outstanding projects to their clients, they performed a “health check” regarding their users’ aptitude and comfort with Civil 3D and AutoCAD. During the assessment, they discovered many topics that their users wanted further instruction on, and they also had users at different levels of knowledge. The internal training program portal they had been using was not meeting their needs for flexibility and the creation of custom content. They had also tried one-on-one training before, but they found that without a reinforcement mechanism, it often needed to be repeated multiple times, which was costly.
Technology Process Assessment to Understand Firm Needs
505Design is an architecture and design firm with multiple locations across the United States. The company has been experiencing growth in architect of record services for large mixed-use and multi-family residential projects and is transitioning business processes to be able to more efficiently produce and manage deliverables. Moving away from the previous third-party cloud and virtual workstation service to the Autodesk Construction Cloud provided long-term savings and a more stable environment. As they prepared for this change, they reviewed their projects, workflows, and technology tools and learned that they needed comprehensive updates to account for functional and staffing changes.
Expanding In-House Capabilities with Civil 3D
EDF Renewables Distribution-Scale Power group is a leader in developing and building renewable energy power plants in the continental U.S. The team relies on outside resources to perform surface grading and cut/fill calculations for their solar project sites using Autodesk Civil 3D. They came to Autodesk Solution Provider CADD Microsystems with a desire to establish internal knowledge and processes that would allow them to bring this civil work in-house. They previously worked with CADD to develop AutoCAD standards, which they are effectively using, maintaining, and expanding upon. Given this success, the Distribution-Scale Power team engaged with CADD to standardize their Civil 3D workflows as well.
Getting Started in BIM Collaborate Pro with Quick Start
Noelker & Hull is an architectural design, master planning, and interior design firm with offices in Pennsylvania and Maryland. They wanted to begin using BIM Collaborate Pro as a solution to create more collaborative workflows within their firm and with clients and create a stronger remote work environment. After completing a trial with the software, they decided to move forward with subscribing to BIM Collaborate Pro, and needed assistance with admin setup and user implementation.
Autodesk Build Onboarding
Ferguson Enterprises is a large wholesale supplier of commercial and residential plumbing services located in Newport News, Virginia. Their facilities management group was expanding, and their facility manager came across a challenge. A small team within their group was working with a general contractor on a project, who was using the Autodesk software PlanGrid. The team had not used PlanGrid before and did not have access to the software.
Transitioning to Autodesk Build
A Morton Thomas & Associates (AMT) is a multidisciplinary engineering and design consultancy headquartered in Rockville, MD, with 20 offices throughout the eastern US. AMT holds contracts with multiple states in the Mid-Atlantic region to provide construction engineering inspection and construction management of highway construction projects for each state’s respective Department of Transportation. As part of their contract requirements for their Virginia Department of Transportation (VDOT) contract, AMT had standardized on Autodesk PlanGrid for project and field management. When their current PlanGrid contract was up for renewal, AMT worked closely with CADD Microsystems and Autodesk to ensure that they procured the correct solution to meet their current project requirements and to ensure they had the right solution for the future, as they anticipate the potential future contract requirement changes with their DOT clients.
Project Assistance for Revit As-Built
Montgomery Engineering Group is a civil site development firm located in Winchester, VA, that specializes in engineering, concrete foundation design, and light structural design. They were working on a project that required them to take DWG as-built and translate them into Revit as-built. They did not have a Revit modeler available for the project and needed to have their Revit models updated quickly, in order to meet the project deadline.
Transitioning to Autodesk Build to Increase Communication and Visibility
InstallNET provides professional project management services for the installation of office furniture across the United States and Canada. InstallNET has used PlanGrid for quality reporting and project management. Their subscription to PlanGrid was expiring, and they wanted to explore solutions that could provide more robust capabilities for issues management and improve their overall workflow and efficiency.
Custom Revit Training for MEP and Architecture Needs
Reid Engineering is an Environmental and Civil Engineering consulting firm headquartered in Fredericksburg, VA. Reid Engineering was looking to move from AutoCAD to Revit for piping, tank, and equipment design to be used on projects involving wastewater facilities. This presented a need for a Revit solution using as much of the “out of the box” content as possible, but with some customization to achieve their standards for design and documentation.
Leveraging Revit models to assist with quantity takeoff [QTO] for project estimating
Corporate Office Properties Trust (COPT) is a REIT, headquartered in Columbia, Maryland, that owns, manages, leases, develops, and selectively acquires office and data center properties. A few years ago, COPT made the investment to transition to Revit and BIM workflows. CADD Microsystems worked with COPT to execute this transition, integrating the unique way the COPT design team would leverage Revit as an owner. COPT had implemented Revit software and BIM workflows in production and wanted to begin leveraging their Revit models to assist with quantity takeoff [QTO] for project estimating. They also wanted to find a way to handle different tenant suites on the same floor within a building, to allow them to isolate and share specific information with tenants.
Company-wide Transition from AutoCAD to Revit
NFD, Inc., a commercial interior design and architectural planning firm, was using AutoCAD Architecture for their projects. To enhance rendering proficiency, teaming opportunities and hiring capabilities, NFD approached CADD about assisting them in transitioning to Revit.
Revit Model Consulting
George Vaeth and Associates (GVA) had a contract with a customer to do a building model using Revit. The customer asked GVA to make significant modifications to the building within a tight timeframe. GVA reached out to CADD Microsystems seeking assistance with making the modifications to ensure they would be completed by the deadline.
Change Management and Software Implementations
Design Collective and CADD Microsystems share a long-standing trusted partnership, where they are empowered to grow upon our recommendations and best practices. The projects we tackle with Design Collective are focused on change management, such as their transition to Revit, and their subsequent adoption of BIM360 Design. Our relationship continues to this day with their use of our custom educational resources.
Company-Wide Improvements for an Industry Leader
Baskervill wanted to improve production and communication within the design process, all without negatively impacting ongoing production. They brought CADD Microsystems in as a full-service partner to focus exclusively on BIM management, conducting an external review, providing guidance and recommendations, and executing the subsequent changes, all without disrupting their day-to-day workflow.
Going Beyond the Call for Better Business Outcomes
Eric Colbert & Associates (ECA) is a growing firm that has been using CADD as a full-service partner for more than a decade. When transitioning to Revit, ECA turned to CADD for implementation services and training. CADD’s deep understanding of ECA’s business led to an implementation that went much further than the standard transition from AutoCAD to Revit.
Full-Service Consulting for better BIM Management
Davis, Carter, Scott (DCS) is a long-time customer, and employs an excellent group of tech-savvy people. Our relationship started with the Autodesk products we sold and supported, and when they first began transitioning to Revit, it became a full-service partnership via our services team. DCS recognized the complexity and challenges of the transition, and sought a partnership with CADD to supplement the in-house CAD/BIM management team, who were all actively leading projects.
star-full
star-full
star-full
star-full
star-empty
(3)

COMPANY SIZE

Medium (21-99 employees)

SERVICES

INDUSTRIES

LANGUAGES

  • English
  • Specialization

    Building Architecture

    Building Architecture specialized partners are focused on Autodesk solutions and services to optimize building design through improved team collaboration, improved data handover, reduced overall design time and increased workoad capacity.

    Civil Infrastructure

    Civil Infrastructure specialized partners help customers optimize Autodesk solutions for delivering successful advanced design projects that include roads, highways, bridges, railways, and/or water infrastructure requirements.

    Mechanical, Electrical & Plumbing (MEP)

    Mechanical, Electrical & Plumbing (MEP) specialized partners help customers optimize Autodesk BIM solutions to improve productivity, design and fabricate better building systems, create model-based project estimates, and efficiently add MEP components to designs.

    Plant Design

    Plant Design specialized partners help customers optimize Autodesk solutions to design, build and operate high performing industrial and manufacturing plants.

    Structural Engineering & Fabrication

    Structural Engineering & Fabrication specialized partners help customers optimize Autodesk solutions for effective design, detailing, and creation of parts, assemblies, building systems, or structures from steel, concrete, and other materials.

    Pre-Construction Design & Planning

    Pre-Construction Design & Planning specialized partners help customers optimize Autodesk Construction Cloud solutions to deliver BIM design authoring and collaboration, project planning and coordination, BIM data management, quantification and bid management.

    Site Construction & Operations

    Site Construction & Operations specialized partners help customers optimize Autodesk Construction Cloud solutions to deliver project management, cost management, field collaboration, quality and safety management, project closeout and facilities management.

    Advanced Materials Analysis

    Advanced Materials Analysis specialized partners help customers optimize Autodesk solutions to deliver advanced simulation, injection molding and progressive failure analysis.

    Computer Aided Manufacturing (CAM)

    Computer Aided Manufacturing (CAM) specialized partners help customers optimize Autodesk digital manufacturing solutions to deliver additive manufacturing, subtractive manufacturing, and generative design.

    Industrial Design & Visualization

    Industrial Design & Visualization specialized partners help customers optimize Autodesk solutions to create, analyze, visualize, and communicate design intent and aesthetics before building a physical prototype including 3D virtual prototyping for automotive design.

    Product Design & Manufacturing

    Product Design & Manufacturing specialized partners help customers optimize Autodesk solutions to deliver product performance, operational efficiency, innovation capacity and simulation fundamentals including mechanical and fluid simulation, stress analysis and finite element analysis (FEA).

    Product Lifecycle Management (PLM)

    Product Lifecycle Management (PLM) specialized partners help customers optimize Autodesk solutions to manage complex product information, engineering and manufacturing workflows, and enterprise-wide collaboration for all involved in the product lifecycle - from engineering and supply chain to quality and manufacturing.

    Advanced Design

    Advanced Design specialized partners help customers utilize the Autodesk Fusion platform for simulation and generative design solutions to design and engineer products with optimized aesthetics, form, fit, and function.

    Advanced Machining

    Advanced Machining specialized partners help customers utilize the Autodesk Fusion platform for enabling additional high-end machining capabilities including advanced 3- and 5-axis strategies, toolpath optimization, and process automation.

    Additive Manufacturing

    Additive Manufacturing specialized partners help customers utilize the Autodesk Fusion platform for enabling machinery to produce lighter, stronger, and better performing parts whilst also reducing material wastage and cost.

    Advanced Mill Simulation

    Advanced Mill Simulation specialized partners help customers optimize Autodesk solutions for post-processing, verification, and simulation using multi-axis milling machines.

    Media & Entertainment Industry

    Media & Entertainment Industry specialized partners help customers optimize Autodesk solutions to deliver 3D modeling, animation, visual effects, and rendering.

    Production Management

    Media & Entertainment Production Management specialized partners help customers optimize Autodesk solutions to streamline creative workflows, enable resources with superior project planning and scheduling capabilities, and keep teams connected and collaborating in the cloud anytime, anywhere.

    Done