Layout basic architectural elements in Revit - Quiz

When placing a column, make sure the Move with gird option is selected in the Properties palette.

There is not a way to make columns automatically move with grids.

There is not a way to set the wall type in Revit software.

Select the appropriate wall type in the Type Selector before starting to drawing walls in the view.

There is a command for each type of wall, so select the correct command.

Hold down the key as you click on items in the model

Hold down the key as you click on items in the model

Select one item in the model, right-click and pick Select Similar in the fly out menu

Draw a rectangle around all the items, then use the Filter command to filter out anything you do not want selected

Select the wall and change the appropriate value in the Properties dialog box.

Select a dimension associated with the wall and change its value.

Trim and Extend a Single Element.

Trim and Extend to a Corner.

There is not a way to change that in Revit software

Select the temporary dimension and move the dimension lines manually.

Set the Temporary Dimension Properties by going to: Manage tab, Additional Settings, Temporary Dimensions

Click the small dot near the dimension line (near 2 in the image) until it is in the correct location.

Right-click on the dimension line and select inside, outside or center from the witness line drop-down menu.

Click the small dot connected to the wall (near 1 in the image) until it is in the correct location.

It cannot be changed.