Exercise: Understand the Use of Autodesk Model Checker for Revit

The BIM Interoperability Tools installer includes the Equipment Data Tool, Spatial Data Tool, Standardized Data Tool, Model Checker, Model Checker Configurator, and COBie Extension for Revit.

The tools can be downloaded from manage.autodesk.com, or installed directly through the Autodesk Desktop App.

The Model Checker automatically checks Revit models and assists with verifying compliance to BIM requirements. The add-in is designed to quickly identify possible conflicts or areas of non-compliance in a model by running several standards checks, which can be viewed or exported for analytical review.

Process

While the Model Checker should not supersede the rules or recommendations put forth by any authority having jurisdiction, it does provide useful guidance for BIM compliance throughout a project's development. To best utilize the add-in, you will need to follow the steps outlines below.

SETUP -> RUN -> VIEW REPORT

Setup: The Model Checker may not be valid for every project or for every phase of the project. Prior to running checks, the user should configure Model Checker using the Setup button on the Revit ribbon. Configuration may be skipped but the user should be aware that the default configuration with default options will be used if configuration is not completed.
Run: Once configuration is complete, the user may proceed to checking the active model or a batch of models for compliance issues by using the Run button on the ribbon. This button will give the user the option to check the active model or to select a series of files to run in batch. All checks specified in the configuration file will be run on the selected model(s) with the values specified for the currently active model and show the user a report containing the result.
View Report: Once a check has been run, the last report may be viewed using the View Last Report button on the Revit ribbon. This allows the last report to be viewed quickly without requiring another check to be run; the user should be aware that this also means that the report shown may be out of date if model changes have been made since the check was run.

Task 1: Configure a Check in Your Model

To enable a configuration for your Revit model, navigate to the Model Checker panel located on the BIM Interoperability Tools ribbon tab and click Setup. If no checkset file has been selected, you will immediately be prompted to load one.

This dialog gives you the option of selecting a specific local checkset XML by clicking the ellipsis button and navigating to the file, selecting a previously loaded checkset, opening one from the web hosted "Public Library", or opening a checkset from "My Library". Your BIM manager can configure your Model Checker to locate the My Library location.

Once a checkset file is open, you are prompted with the Current Checkset dialog. This window gives you a preview of the checkset information and a tree with the specific headings, sections, and individual checks in the currently active checkset.

You can begin to customize the configuration check by enabling or disabling checks defined by the initial template selected. To enable or disable a check, click the "Check Box" icon(s) located in the browser at the left-hand side of the Configuration dialog box. If the icon appears grayed out, it is an indication that sub-sections exist for the particular check in question and one or more checks have been enabled.
Once you have configured your checkset appropriately, click Save to save your settings, or Save and Close to save your settings and close the dialog box. This will associate the checkset XML file and any modifications you made to the current Revit model.

Task 2: Run Check and View Report

Run

Once your Revit model has been configured accordingly, click the Run icon. You will be presented with various processing options that will allow you to batch-select multiple Revit project files to run the customized check on. If your Revit model contains corresponding links, you will have the option to select or deselect those files to be included or excluded from the check.

After all appropriate files have been selected or deselected, click Run Reports in the Action Bar to continue with the processing of the model(s).

The Model Checker will begin to process and analyze all selected checks, and a progress bar will provide real-time updates on which project file is currently being analyzed (if multiple have been selected), and what the current check is.

When the analytical process has been completed, a dialog box will appear providing the overall result of the check(s). This report will provide information regarding which checks have failed within your model and a description of why the particular check failed. This information can be exported to HTML, copied to the Clipboard, or exported to Excel for analytical review and data tracking.

View Report

After a report has been generated, you can always access the most recent report by using the View Report tool. Each time a new report is run, the prior report saved in the Revit model is overwritten.

Introduction