A full understanding of the existing conditions can help you design a better site and access to it. In this module, learn how to take advantage of point clouds for modeling the existing conditions. Also learn how to take advantage of the work done by other people like the GIS department, architect, and utility companies/departments.
A full understanding of the existing conditions can help you design a better site and access to it. In this module, learn how to take advantage of point clouds for modeling the existing conditions. Also learn how to take advantage of the work done by other people like the GIS department, architect, and utility companies/departments.
By the end of the course, you should be able to:
Selecting the right site for a building can make a big difference in the cost of the project. Selecting a site with transportation access to it, enough space for ample parking, and appropriate building codes and zoning can determine if the project gets approved or not. In this module, you learn how to use Model Builder to display the site. Then, you learn how to connect GIS data to the InfraWorks model and run a proper GIS analysis before selecting the project site.
Module outline
Selecting the right site for a building can make a big difference in the cost of the project. Selecting a site with transportation access to it, enough space for ample parking, and appropriate building codes and zoning can determine if the project gets approved or not. In this module, you learn how to use Model Builder to display the site. Then, you learn how to connect GIS data to the InfraWorks model and run a proper GIS analysis before selecting the project site.
This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:
Every roadway development project begins with a good existing condition plan, which displays information about the physical features and the topography of the area of development interest. We also need to understand the area of surrounds that extend beyond the development boundaries as this helps us with hydrology environment transportation and visualization tasks.
Module outline
Every roadway development project begins with a good existing condition plan, which displays information about the physical features and the topography of the area of development interest. We also need to understand the area of surrounds that extend beyond the development boundaries as this helps us with hydrology environment transportation and visualization tasks.
This module builds on the previous module “Reduce Errors by Using Point Clouds in Civil 3D”.
This module takes approximately 25 minutes to complete. By the end of the module, you should be able to:
The focus of this module is to import the land survey control points and match the existing conditions imagery, point clouds, and vector data to assure accuracy, and good physical description of the area to be developed. Then, we will create ground surface from classified point cloud data. And finally, because surface data is so crucial to all roadway projects, we must understand the size limitations and how to efficiently manage surface Level of Detail, or LOD, to accommodate the swath areas of high detail and the surrounds areas of less detail.
Module outline
The focus of this module is to import the land survey control points and match the existing conditions imagery, point clouds, and vector data to assure accuracy, and good physical description of the area to be developed. Then, we will create ground surface from classified point cloud data. And finally, because surface data is so crucial to all roadway projects, we must understand the size limitations and how to efficiently manage surface Level of Detail, or LOD, to accommodate the swath areas of high detail and the surrounds areas of less detail.
This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:
This module requires user-level knowledge of ReCap Pro and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:
This module was created by Lucy Kuhns, Designated Support Specialist at Autodesk.
Using point clouds to create the existing conditions model can help reduce errors and ensure accuracy. In this module, you learn to bring a point cloud into Civil 3D and use it to create a surface model.
Module outline
Using point clouds to create the existing conditions model can help reduce errors and ensure accuracy. In this module, you learn to bring a point cloud into Civil 3D and use it to create a surface model.
This module takes approximately 15 minutes to complete. By the end of the module, you should be able to:
Using point clouds to create the existing conditions model can help reduce errors and ensure accuracy. In this module, you learn how to bring a point cloud into InfraWorks and use it to create a model.
Module outline
Using point clouds to create the existing conditions model can help reduce errors and ensure accuracy. In this module, you learn how to bring a point cloud into InfraWorks and use it to create a model.
This module takes approximately 25 minutes to complete. By the end of the module, you should be able to:
The focus of this module is to import the land survey control points and match the existing conditions imagery, point clouds, and vector data to assure accuracy, and good physical description of the area to be developed. Then, we will create ground surface from classified point cloud data. And finally, because surface data is so crucial to all roadway projects, we must understand the size limitations and how to efficiently manage surface Level of Detail, or LOD, to accommodate the swath areas of high detail and the surrounds areas of less detail.
Module outline
The focus of this module is to import the land survey control points and match the existing conditions imagery, point clouds, and vector data to assure accuracy, and good physical description of the area to be developed. Then, we will create ground surface from classified point cloud data. And finally, because surface data is so crucial to all roadway projects, we must understand the size limitations and how to efficiently manage surface Level of Detail, or LOD, to accommodate the swath areas of high detail and the surrounds areas of less detail.
This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:
This module requires user-level knowledge of Civil 3D and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:
This module was created by Lucy Kuhns, Designated Support Specialist at Autodesk.
The focus of this module is to import the land survey control points and match the existing conditions imagery, point clouds, and vector data to assure accuracy, and good physical description of the area to be developed. Then, we will create ground surface from classified point cloud data. And finally, because surface data is so crucial to all roadway projects, we must understand the size limitations and how to efficiently manage surface Level of Detail, or LOD, to accommodate the swath areas of high detail and the surrounds areas of less detail.
Module outline
The focus of this module is to import the land survey control points and match the existing conditions imagery, point clouds, and vector data to assure accuracy, and good physical description of the area to be developed. Then, we will create ground surface from classified point cloud data. And finally, because surface data is so crucial to all roadway projects, we must understand the size limitations and how to efficiently manage surface Level of Detail, or LOD, to accommodate the swath areas of high detail and the surrounds areas of less detail.
This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:
This module requires user-level knowledge of InfraWorks and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:
This module was created by Lucy Kuhns, Designated Support Specialist at Autodesk.
This content series begins with describing the difference between TIN and Grid type surfaces and their size limitations; and what happens to your project if the limits are exceeded and overflow cached files are created.
Module outline
This content series begins with describing the difference between TIN and Grid type surfaces and their size limitations; and what happens to your project if the limits are exceeded and overflow cached files are created.
This content series takes approximately 20 minutes to complete. By the end, you should be able to:
This content series requires user-level knowledge of Civil 3D and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:
This content series was created by Lucy Kuhns, Designated Support Specialist at Autodesk.
